Adding deck bench brackets to an existing may seem like too big a task. Instructions, One, all components of the Housing Bank, including: six boards of 2×6 and 14 inches long for the legs, six boards 1×2 and 12 ½ inches long for the upper brackets of the legs; six boards 1×2 and 15 inches long for the lower leg holders and two 1×8 boards and 60 inches long for the support.
Then to Instructions deck bench brackets, Place two pieces of leg on a desk, with a ½ inch gap between the edges of 14 inches. Three, Hold the part upper and lower supports in place, drill two holes through each foothold in each leg. For units on the legs of form vertical, resting on the bottom brackets and spaced 20 inches apart. Then Drill two pilot holes through each slat desktop support each table top.
12 Photos Gallery of: Deck Bench Brackets Ideas
after that Retouch sanding as needed around the screw holes, and then varnishing the bank .Finish to instructions deck bench brackets is Move the bank’s position on the deck, then drills two pilot holes through each foothold bottom of the legs on the deck, and ensures the bank to cover with 3-inch screws through the pilot holes.