Home Bar Counter

Jul 20th

How to build a home bar counter. There is a basic and simple way to build a multipurpose bar for your home. You can add a bar to an existing wall or building a wall to add a bar. The bars provide more space for dining and take up less space than a table. Build your rod by first determining its depth. An excellent measure is 18 inches (45.7 cm) from the front to the rear. If you are using normal-sized chairs, make the part superior of the bar is 30 inches (76.2 cm) above the floor. If you are using banks to bar, sets the bar at 42 inches (1.06 cm) above the floor.

Bar counter kiaat veneer and stone tops
Bar counter kiaat veneer and stone tops
RELATED :  Build Liquor Storage Cabinet

Home bar counter, veneer acquires 3/4 inch (1.9 cm) to construct the rod. Cut the wood to a depth of 18 inches (45.7 cm), and then cut the end desired length. Cut strips of 1½ inches (3.8 cm) wood your 3/8 inch (1.9 cm). Glue and nail strips around the outer ends of the piece of wood 18 inches (45.7 cm). This will make your bar is 1 ½ inches thick. Bar laminate to cover your purchase. Use contact adhesive to ensure your laminate on the part superior of your bar. Cut the rolled to a length of 1-1 1/2 inches (2.54 to 3.8 cm) larger than the portion above your bar.

12 Photos Gallery of: Home Bar Counter

Image of: Union Square Deep Cappucino Counter Home Bar
Image of: Counter Home Bar
Image of: Eclectic Home Bar Design Stacked Stone Pillar Marble Counter
Image of: Bar Counters Designs Concept
Image of: bar counter design ideas
Image of: bar counter design picture
Image of: Bar Counter Design Design Ideas
Image of: Bar Counter Closed
Image of: Home bar counter design
Image of: Bar Counter Modern Ideas
Image of: Surprising Anavia Modern Black Home Bar Counter
Image of: Bar counter kiaat veneer and stone tops
 
RELATED :  Bar Sideboard Designs Ideas